Miranda Kaleido-X16 Instalační manuál stáhnout pdf (Strana 25)

Kaleido-X16

Hardware Description & Installation Manual

Mosaic Outputs

HDMI Outputs

There is one HDMI output for each output head (MV OUT 1, MV OUT 2). See HDMI Outputs

on page 25 for specification details. The HDMI connection is a high definition connection

for the multiviewer output, which carries audio and video, and can support resolutions up

to 1920

× 1200.

HD-SDI Monitoring Outputs

There are two HD-SDI monitoring outputs: one for each head (see HD-SDI Monitoring

Outputs, on page 26 for specification details).

External Reference

The external reference (REF) input signal allows the Kaleido-X16 to genlock to the local

plant.

Note: To use an HDMI output connection as a DVI output, use an HDMI

cable with an HDMI-to-DVI adapter at one end. Alternatively, use an HDMI-

to-DVI cable.

IMPORTANT

Audio monitoring at the HD-SDI outputs is supported on recent

hardware only.

Support for audio monitoring at the HD-SDI outputs requires version 5.30

(or later) of the Kaleido-X Software, and recent hardware. In the XAdmin

Status and Options page, under SYSTEM, the value indicated for the Card

revision attribute must be 0x4 or more.

MV OUT 1/DVI OUT 1 MV OUT 2/DVI OUT 2

BNC connector for

Mosaic SDI OUT 2

BNC connector for

Mosaic SDI OUT 1

BNC connector for

External Reference

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 44 45

Žádné komentáře

Miranda Kaleido-X16 Instalační manuál Strana 25