Miranda Kaleido-X16 Provozní pokyny stáhnout pdf (Strana 11)

Kaleido-X16

Quick Start Guide

• A rack-mountable mechanical framework (for mounting into a 19-inch EIA rack)

• A removable door to cover and protect the front of the frame

• An optional power supply redundancy

• Ventilation

Front view of the Kaleido-X16 frame (PSUs installed; front cover removed)

The Kaleido-X16 system is available in two model types: the Kaleido-X16-Dual and the Kaleido-X16. There

are two heads on the Kaleido-X16-Dual and one head on the Kaleido-X16.

Step 1: Physical Setup

Powering Up the Kaleido-X16

To power up the Kaleido-X16, do the following:

1. Plug the power cord(s) from the Kaleido-X16 into a grounded power outlet.

2. Push the power button at the front of the frame (behind the front cover).

The startup sequence takes approximately four minutes, during which time some video may appear

on the display(s). The startup is completed when the CPU LED is solid green.

See also: For more information about the Kaleido-X16, see the Kaleido-X16 Hardware Description & Installation

Manual.

IMPORTANT: If you only have one PSU, make sure you plug your power cable into the power connector on

the right side of the rear connector panel (as you face the rear of the frame). This should be on

the same side of the frame as the one PSU you have installed. If you do not do this, your system

cannot draw power.

IMPORTANT: If you have two PSUs, make sure you plug in both power cables into both power connectors of

the rear connector panel. If you do not do this your system cannot have PSU redundancy.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 37 38

Žádné komentáře

Miranda Kaleido-X16 Provozní pokyny Strana 11