Miranda RCP-100 Provozní pokyny stáhnout pdf (Strana 26)

GUIDE TO INSTALLATION AND OPERATION

22 | RCP-10x0

5 Troubleshooting Guide

Here is what to do when you have a problem communicating between an HRS-1801 and an RCP-10x0.

Please follow ALL the steps in order.

5.1 Initial setup

1. Connect the RCP-10x0 as depicted below:

PoE Power

Injector

Straight Ethernet cable

Computer

OUT

CROSSOVER Ethernet cable

IP parameters of this computer:

IP Address : 192.168.100.200

Subnet mask : 255.255.255.0

Gateway : 192.168.100.1

DIP Switch settings:

CONFIG mode

ROUTER mode

Make sure the Ethernet cable between the PoE Power Injector and the computer is a crossover cable.

2. Set the IP parameters of the computer as follow (Windows XP shown):

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33

Žádné komentáře

Miranda RCP-100 Provozní pokyny Strana 26