Miranda Kaleido-X16 Instalační manuál stáhnout pdf (Strana 43)

Kaleido-X16

Hardware Description & Installation Manual

Configuring Unicast IP Addresses

The unicast IP feature enables a Kaleido-RCP2 to find up to three Kaleido-X16 systems on different subnets

and connect to them (via network gateways), while maintaining connections to Kaleido-X16 systems in

its own subnet.

To configure a unicast IP address on the RCP2, do the following:

1. Press and hold the ENTER key on the RCP2 for 8 seconds to display the configuration menu.

2. Select ETHERNET OPTIONS on the LCD display, then press ENTER.

3. Select Unicast host IP, then press ENTER.

4. Select Enable IP 1, then press ENTER.

The Enable IP x parameter instructs the RCP2 to query the selected IP address for a list of rooms.

5. Select Host IP ADDR, then press ENTER.

6. Using the numeric keypad, type the IP address of a Kaleido-X16 on a remote subnet, then press ENTER.

7. Repeat step 4 to 6 to add unicast IP addresses for up to three remote Kaleido-X16 systems.

Restoring Default Parameters

The Kaleido-RCP2’s Configuration menu provides an option to restore the device’s default parameters.

This option is called FACTORY DEFAULT.

Selecting this option will revert the following elements to their default values:

• The network parameters.

• The room selection.

• The login position.

Once you exit the Configuration menu, the device will restart.

Here are the default parameter values:

Notes

• To navigate the RCP2 menu, press the 2 key to move up, or the 8 key to move down.

• There is no need to configure unicast IP addresses for Kaleido-X16 systems on the same

subnet as the RCP2.

DHCP

Enable

Default IP address

10.0.3.191

Default subnet mask

255.255.0.0

Default gateway

0.0.0.0

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 81 82

Žádné komentáře

Miranda Kaleido-X16 Instalační manuál Strana 43