Miranda Kaleido-X16 Instalační manuál stáhnout pdf (Strana 59)

Kaleido-X16

Hardware Description & Installation Manual

3. Apply power to the ABT and make sure it is connected to the hub or switch.

4. Press the RESET button for at least 1 second.

The ABT will reboot with the following static network configuration:

5. Using the browser, connect to the unit using the following address: 10.0.3.190.

The Web server serves the Web pages that allow monitoring and configuration of the parameters. You

can access these pages by clicking on the links on the left side of the current page.

The individual pages are described in the following sections.

Parameter Value

DHCP OFF

Static IP address 10.0.0.1

Subnet mask 255.255.0.0

Default gateway 10.0.0.1

Note: If the hub or switch is Power over Ethernet (PoE) enabled, simply connect it to the unit

using an Ethernet cable. If not, PoE mid-span (‘inserter’) equipment must be placed between the

hub or switch and the Audio Bridge Terminal.

Note: The RESET button is beside the ETHERNET/POWER RJ-45 connector.

Parameter Value

DHCP OFF

Static IP address 10.0.3.190

Subnet mask 255.255.0.0

Default gateway 10.0.0.1

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 81 82

Žádné komentáře

Miranda Kaleido-X16 Instalační manuál Strana 59